How much sleep does the human need?

Humans spend about a third of their lives in “sleep”. You can tell how necessary sleep is when you lack it. You can hardly concentrate because of all the tiredness. But How much sleep does the human need exactly?

The longer the sleep deprivation, the more extreme the consequences. The brain perceives visions, shadows and sounds that do not exist. The individual need for sleep depends largely on the genetic make-up. There are people who can get by on five hours of sleep, while others need ten hours to feel well rested.

Sleep researchers have found that people in Western countries sleep an hour less on average than they did 20 years ago. They were also able to show that those who sleep too little perform less during the day – and often don’t even notice it. Because you can get used to too little sleep. This leads to a paradoxical phenomenon: the more people work, the less they sleep. The longer the working hours, the more frequent are sleep disorders, analyzed the scientists of the Federal Institute for Occupational Safety and Health. But only those who have had a good rest can achieve their full potential.

How much sleep does the human need now?

Seven hours of sleep

A lot of research shows that most people need seven to eight hours of sleep. As a rule of thumb: If you can work while sitting for long periods of time without getting sleepy, you have found your personal sleep quota.

Get to know your sleep needs

Holidays are a good way to find out your individual sleep needs. Always go to bed at the same time in the evening and not set an alarm clock. Do not get up until you feel awake and well rested. Then write down how long you slept each night. From this you can read your personal sleep quota, which should also be adhered to during the working week.

Missing sleep can be made up for

Sometimes sleeping just doesn’t work out. Fortunately, a lack of sleep can be made up for. This is shown by a study by the American sleep researcher David F. Dinges from the University of Pennsylvania in Philadelphia and his colleagues. Anyone who really sleeps in after a few short nights regains a lot of strength. However, you are only really fit again when you have had enough sleep for several days.

See:

Top 7 Best Ear Muffs for Sleeping in 2020
Sleep Better: Restful Nights with These 5 Tips

source https://homearama.tv/how-much-sleep-does-the-human-need/

Sleep Better: Restful Nights with These 5 Tips

Finally Sleep Better Again

Sleep is just as essential to humans as oxygen, water and food. A few days without food are a challenge for many, but they are bearable. But what happens when the body is deprived of sleep for weeks? Even a sleepless night disturbs the biorhythm and you feel depressed, tired and have difficulty concentrating. However, this condition is common to many people as they suffer from insomnia.

Those affected can suffer so much from a sleep disorder that it has serious consequences for their well-being. That is why it is important to be able to sleep better and to wake up fresh in the morning. Sleep is also so important because many impressions and topics are processed during it, learning is also carried out in sleep and problem-solving processes take place.

Sleep Better: When Your Head Is Awake

Fear or depression, among other things, can be responsible for insomnia or a sleep disorder. Lying in bed brooding and worrying? Going through certain situations in your head over and over again? These are typical patterns of thought loops that keep you awake.

But it’s not just the thoughts that keep you awake. Body and mind influence each other. If you think of something that scares you, hormones and messenger substances are released that, like in a dangerous situation, prepare you for fight or flight. At night in bed, this state of tension is inappropriate and prevents sleep.

Five tips on what to do to help you sleep better:

Turn off the screen to sleep better

The magic word is “sleep hygiene”. Regardless of whether it’s a smartphone, laptop or television: In the hour before you go to sleep, you should stop looking at a screen. If you have got used to surfing the Internet or watching your favorite series, this should definitely be avoided if you have trouble sleeping. It is important to protect the brain from this overstimulation and overstimulation. Only without a laptop and cell phone in bed do you realize how tired you actually are. That way you sleep better and don’t stay awake unnecessarily.

If you cannot do without a cell phone or laptop in bed, it is best to use a program that filters out the blue light of the device, which is responsible for the release of wakefulness hormones.

Better sleep through rituals and rest in the evening

In order to be able to sleep better, it can be helpful to end the evening calmly and to relax physically and mentally. Small rituals, such as drinking a cup of herbal tea, relaxation techniques, breathing meditations, sleep meditations or progressive muscle relaxation (PMR) can help. In order to be able to sleep better, it can also be beneficial to always go to bed and get up at the same time. A fixed sleep rhythm makes it easier for the body to fall asleep and wake up, as the body quickly gets used to fixed times.

Let go and sleep better

Anyone who lies in bed troubled with worries and cannot fall asleep should not try hard to fall asleep. Mindfulness can help you observe your thoughts without judgment and help you sleep better. Maybe it helps to write a diary in the evening. Here fears and worries can be put down in writing, they are given space and they no longer take up so much space in the head.

Live healthy and sleep better

A healthy lifestyle with a balanced diet and regular exercise is extremely beneficial for healthy and restful sleep. Physical activity helps the biorhythm to normalize and sleep better.

Reduce anxiety

Fear or depression, among other things, can be responsible for insomnia or a sleep disorder. If fears or negative thoughts ruin sleep, they are most likely restricting those affected in other areas of life as well. It is important to work on these states and thoughts as early as possible so that they do not manifest and limit themselves daily.

Do you find it difficult to fall asleep? Do you turn from side to side at night? Sleep disorders are directly related to stress and other psychological stress. Physical illnesses can also be symptoms of poor sleep. Healthy sleep is the greatest source of health, performance, and success. Selfapy is committed to helping people sleep soundly. Find out more about the courses offered by Selfapy in a free info talk.

See more: Top 7 Best Ear Muffs for Sleeping in 2020

source https://homearama.tv/sleep-better/

How much sleep does the human need? https://t.co/J07cFovHU9

How much sleep does the human need? https://t.co/J07cFovHU9

— Home Arama (@AramaHome) October 28, 2020

from Twitter https://twitter.com/AramaHome

October 28, 2020 at 09:16PM

Sleep Better: Restful Nights with These 5 Tips https://t.co/KIxTdZYvq2

Sleep Better: Restful Nights with These 5 Tips https://t.co/KIxTdZYvq2

— Home Arama (@AramaHome) October 28, 2020

from Twitter https://twitter.com/AramaHome

October 28, 2020 at 09:16PM

Dyson v10 vs v11: What is the Best? https://t.co/QLfUzFQS5o

Dyson v10 vs v11: What is the Best? https://t.co/QLfUzFQS5o

— Home Arama (@AramaHome) October 19, 2020

from Twitter https://twitter.com/AramaHome

October 19, 2020 at 05:16PM

Dyson v10 vs v11: What is the Best?

Dyson brings a new cordless vacuum cleaner onto the market every year. Most recently, the Dyson V11 Absolute followed the V10 Absolute. One reason for us both in our comparison Dyson v10 vs v11.

What we want to find out in this comparison of the two devices is:

Has the technology been improved so that the more expensive, newer V11 Absolute is worth buying?

We will compare the two premium class cordless vacuum cleaners (v10 vs. v11) for you to find out the differences and similarities.

You can also find out in this comparison for whom a purchase of the newer, more expensive model is worthwhile.

Both cordless vacuum cleaners performed very well in our tests and impress with many good extras.

If you can’t wait, follow the link directly to the overview.

The advantages

Advantages of the Dyson V10 Advantages of the Dyson V11

Advantages of the Dyson V10	Advantages of the Dyson V11
Suction power: 150 AW	Suction power: 185 AW
Running time: approx. 50 minutes	Running time: approx. 60 minutes
Dirt container volume: 0.76 l	Dirt container volume: 0.76 l
Weight: 2.6 kg	Weight: 3.05 kg
Cleaning test result: 99%	Cleaning test result: 99%

What are the differences in the design of the Dyson cordless vacuum cleaner V10 vs. V11?

Both models are high-end bagless cordless vacuum cleaners

The Dyson vacuum cleaners use a very efficient system of cyclones. These accelerate the air in order to throw the dirt out with the generated centrifugal force.

With the V10, a completely revised design of the Dyson V series came onto the market for the first time in March 2018. The arrangement of the engine and dirt container was changed so that both were in line with the intake manifold. Above all, this had the positive effect that it was much easier to empty the dirt container. This design was retained on the Dyson V11, which was released in March 2019.

Both models are available in different versions. These are mainly decided by the scope of the accessories supplied.

What other similarities and differences do we find in the Dyson V10 vs. V11?

• Dirt container
• engine
• activation
• Hepa filter
• height and weight

Dirt container

Comparing the Dyson V10 vs. V11 is noticeable that the dirt container has not only remained the same in terms of its arrangement. The capacity of the container has not changed either. 0.76 l

The emptying function introduced in the Dyson V10 and retained in the V11 via a slider on the underside allows the container to be emptied precisely into the bin.

The motor

The motor is basically the same in both models and has an output of 535W and generates 125,000 revolutions per minute.

The suction power was already at a very high level with the V10. Nevertheless, the suction power of the new V11 could be improved despite the same engine. We would like to go into this in more detail later.

Activation

To activate the Dyson , both use the conventional “trigger system” .

Like a pistol, pull the trigger and the Dyson immediately starts with full power. If you let go of the trigger, however, it switches off immediately.

What is often found inconvenient at first is part of the secret of how Dyson gets its outstanding battery performance. It is only activated when you really vacuum and battery is saved in between.

It is very good that the bottom roller starts rotating immediately at the push of a button. This is by no means the case with all cordless vacuum cleaners.

Hepa filter

The Hepa filter is a unique selling point of the cordless vacuum cleaner . Very easy to remove and clean, no “disposable filter” is required here. That saves money and protects the environment. This works the same for the V10 and the V11.

Height and weight

Both Dyson models can be used as a cordless vacuum cleaner as well as a cordless hand vacuum cleaner

If you place the Dyson V11 next to the V10 on the floor, you can see that both are about the same height .

The size of the Dyson V10 and the Dyson V11 as a cordless vacuum cleaner (rounded figures)

Criteria	Dyson v10	Dyson v11
Length	125 cm	128 cm
Size of the power unit	25 cm	26 cm
Width of the bottom roller	23 cm	23 cm
Weight	2.6 kg	3.05 kg

The conversion to the hand vacuum cleaner also shows that the size varies only insignificantly.

In contrast, there are clear differences in weight . The new V11 model weighs an impressive 400 grams more. With the V11, this corresponds to an empty weight of 3.05 kg. This makes it noticeably heavier. This is not a restriction when vacuuming the floor, as the weight is well distributed. When vacuuming with a hand-held vacuum cleaner, however, the weight becomes noticeable after longer vacuuming.

The size of the Dyson V10 as a handheld vacuum cleaner

Criteria	Dyson v10	Dyson v11
Length	varies greatly with the essay	varies greatly with the essay
Power unit size	25 cm	26 cm
Weight	1.7 kg	2.1 kg

LCD display

One of the main differences between the models is that Dyson has given its V11 an LCD display .

With the help of this display you get useful information about the current suction mode, the remaining running time, etc. This enables Dyson to use the cordless vacuum cleaner more efficiently.

Accessories in comparison – how does the scope of delivery differ?

The included accessories differ mainly in the Torque-Drive nickel brush that comes with the V11. This is the main cleaning brush of the new Dyson, which has a direct drive on the roller.

As far as usual. The brush rotates and with the help of the bristles conveys the dirt into the suction tube.

What is new with the Torque-Drive Nickel, however, is that this roller recognizes the ground and automatically adapts to it.

This is how Dyson manages to achieve a higher cleaning performance with the same engine power.

We think that this is a real innovation and enrichment, because it makes changing the brush, depending on the surface, superfluous.

Another innovation in the supplied accessories is the Quick Release extra-hard brush.

This is ideal for coarse soiling on a robust surface. It is now also included with the Dyson V10 Absolute Pro

Equipment	Dyson V10 Absolute	Dyson V11 Absolute (Pro)
Suction pipe	Yes	Yes
Torque-Drive nickel	No	Yes
Electric brush with direct drive	Yes	No
Electric brush with soft roller	Yes	Yes
Combination accessory nozzle	Yes	Yes
Crevice nozzle	Yes	Yes
Mini electric brush	Yes	Yes
Quick-release extra-soft brush	Yes	Yes
Quick-release extra-hard brush	No	Yes
Storage and charging station	Yes	Yes
Charger	Yes	Yes
Bracket suction pipe (only 2020 model)	No	Yes

The accessories also vary due to the different designs. You should therefore think carefully about which version you choose.

Each essay has its specialty and is very useful in this. 50 euros more for additional articles can quickly pay off. If you buy the essays afterwards, they are much more expensive.

For example, the Dyson V11 Animal + comes with fewer accessories. That’s why we recommend the Dyson V11 Absolute in this case.

Cleaning test Battle Dyson V10 vs. V11: Which one makes cleaner?

To understand the differences between the Dyson V10 vs. To find out Dyson V11 and to be able to compare them properly, we of course subjected both cordless vacuum cleaners to our cleaning test.

We test the equipment not only in everyday life but we test them well in our test area . They have to suck up dirt of different types on different carpets and on hard surfaces.

Here’s how you cut off:

The test results overall

Dyson V10	Dyson V11
99%	99%

You can also see the detailed test results in the two individual tests of the Dyson V10 and the Dyson V11 .

Test on a hard surface

Both devices performed very well on hard surfaces and achieved almost 100%.

Dyson V10 on a hard surface

Dyson V11 on a hard surface

Low carpet

The two cordless vacuum cleaners have also successfully removed the dirt on low carpets . While the V10 mini “only” managed 99%, the V11 could suck up 100%.

Dyson V10 on low carpet

Dyson V11 on low carpet

Long fiber carpet

Even with long-fiber carpets, the suction power was extremely good, almost perfect .

Test results of the V10 on a long carpet

Test results of the V11 on a long carpet

Comparison of the two devices in everyday life

We had fun cleaning the carpets first with a Dyson V7 until it couldn’t suck anything out. Then we are over it with the V11 or the V10 and have again been able to suck a lot of dirt out of the carpet.

After extensive comparison, we can attest both devices a sensational cleaning performance.

What influences the cleaning performance of the Dyson V10 and Dyson V11?

As already mentioned, the Dyson V10 and Dyson V11 can be used both as a cordless vacuum cleaner and as a cordless handheld vacuum cleaner. The plug-in system for this is identical for both devices and the conversion is child’s play. It is particularly practical that all attachments can both be attached to the suction tube and attached directly to the dirt container.

Vacuuming with the Dyson V10 as a handheld vacuum cleaner is less strenuous than with the newer model. This is where the almost half a kilo that the V11 also has becomes noticeable.

How do the Dyson V10 and V11 differ in terms of suction levels and how long can I vacuum with the Dyson?
Both models have three different suction levels . While the levels on the V10 are classically named level 1, level 2, and max, the suction levels on the V11 eco, for the weakest level, are called Med and Boost.

The suction levels differ not only in terms of their names.

A special innovation is that Dyson has developed an auto mode with the Med suction level. This adapts to the soil conditions . As a result, the vacuum cleaner achieves a higher mileage, from now up to 60 minutes.

The maximum suction power of the V11 in the Boost level is now 185 Airwatt. This corresponds to an improvement of almost 25%.

In the following table you can see a comparison of the suction levels and suction power of the Dyson V10 and the Dyson V11.

Performance comparison of the Dyson V10 and the Dyson V11

	Dyson V10			Dyson V11
Suction level	Battery power minutes	Suction power AW	Suction level	Battery power minutes	Suction power AW
step 1	approx. 50 min	14 AW	eco	approx. 75 min	29 AW
Level 2	approx. 30 min	35 AW	med	approx. 45 min	39 AW
MAX	approx. 9 min	150 AW	boost	approx. 8 min	185 AW

We think the battery power and the suction power of both models are excellent. You can also use it to clean larger apartments in one go.

With the V11 model from 2020, the battery can now even be removed with the push of a button and replaced with a full one.

We think the battery power and the suction power of both models are excellent . You can also use it to clean larger apartments in one go.

With the V11 model from 2020, the battery can now even be removed with the push of a button and replaced with a full one.

Are there any differences in handling between the V11 and V10?

The cordless vacuum cleaner market is a hotly contested business area today. Dyson is at the top, but why is that? Not only the battery and suction power just described is excellent. You can also tell that Dyson attaches great importance to user-friendliness .

How does the commissioning work?

The user-friendliness is already evident when unpacking and starting up for the first time. Both models come with a minimum of packaging material and completely without plastic.

This gives us an extra sustainability point.

Commissioning is very simple. You simply plug the required attachments into each other and the locks snap into place automatically. It works almost self-explanatory.

The manufacturer recommends charging the battery fully first. A slight disadvantage of the new Dyson V11 becomes visible here, as it takes 4.5 hours to fully charge. The older model, however, only takes 3.5 hours.

However, once the vacuum cleaner is charged, you can start right away.

Are there differences in volume between the Dyson V10 and the Dyson V11?

The Dyson V10 moves between 73 and 80 dB on our decibel scale, while the V11 hums with 65 dB in Eco mode to 75 dB in Boost mode.

This shows that they are actually relatively quiet . Dyson was able to implement minimal improvements here , which of course you can’t really hear with the bare ear. In principle, however, the volume of the Dysons is quite tolerable.

Volume of the Dyson V10 and V11

V10 suction level	V10 volume	V11 suction level	V11 volume
Level MAX	80 dB	boost	75 dB
Level 2	75 dB	med	70 dB
step 1	73 dB	eco	65 dB

In both models, Dyson relies on a kind of ball joint between the suction tube and the roller. This allows you to quickly change direction and suck into the corners. In addition, the motor sits on top of the handle, which allows you to vacuum under the furniture.

The weight is well distributed with both cordless vacuum cleaners, so that vacuuming is not overexerted by the weight.

Are the Dyson vacuum cleaners easy to maintain?

The maintenance of the V10 and V11 is kept very simple according to the principle of user-friendliness and is again limited to a few simple steps.

The maintenance of the Dyson cordless vacuum cleaner essentially consists of three areas.

• The emptying and cleaning the dirt container
• The cleaning of the filter
• Maintenance of the battery

What do I have to watch out for when emptying the dirt container?

One of the great achievements of modern cordless vacuum cleaners is that they work without a disposable bag .

With conventional vacuum cleaners, the repeated purchase of vacuum cleaner bags was a real cost factor and it was not a good deal when it had to be changed.

The bagless cordless vacuum cleaners also impress with the dust container made of transparent plastic. You can see at any time whether the container is full and thus empty it in good time.

The actual emptying then works with the V10 and V11 with the help of a red slide on the underside of the dirt container. If you push this forward, the flap opens automatically and the dirt is pushed out and ends up in the trash can.

If you want to clean the container, it can be removed and washed out at the push of a button.

Both procedures work great. However, we got the impression that the device on the new V11 is even more stable and precise.

How do I service the Hepa filter?

Again, you can save time and money and protect the environment .

Both the Dyson V10 and the Dyson V11 come with washable filters.

Simply twist off the lid on the back and the filter can be removed. Rinse under cold water and then reinstall after drying for 24 hours.

Maintenance of the battery

The batteries in Dyson devices are generally considered to be robust and long-lasting .

However, should a battery break down, it can be changed on both the Dyson V10 and the Dyson V11.

With the latest 2020 model of the Dyson V11 (Dyson V11 Absolute Extra), however, this is much easier than before. With a new click system, the battery can simply be clicked out and a new one inserted.

The revised system of course also opens up the possibility of changing the battery quickly when it is empty. This ensures that the suction time is (at least) doubled.

So it’s a real advantage of the Dyson V11 over the Dyson V10 .

Dyson v10 vs v11: What is the Best

If you now for the Dyson V10 or but the newer, more expensive Dyson V11 decide ?

The answer is clear and unequivocal: It depends!

Both vacuum cleaners did very well in our comparison and it is really not easy to say which of the two is the better deal.

The cleaning tests have shown that both absorb the dirt very thoroughly . So you don’t have to worry about not getting your apartment clean.

The new Dyson V11 particularly impressed us with its new torque drive . The new role that automatically detects the underground is a real asset. This means that annoying changing of the cleaning roller is largely eliminated.

So if you have a lot of different floors , sometimes carpet, sometimes laminate, sometimes etc., then we recommend the Dyson V11 with the newly developed Torque-Drive Nickel (floor roller).

The automatic mode , which ensures that the vacuum cleaner adapts to the surface, is very impressive from a technical point of view and is certainly the future. At the current time, however, this does not yet lead to a measurable superiority in cleaning. With the Dyson V10, we always vacuumed in medium mode and achieved a similar cleaning result.

The battery performance of the Dyson V11 is generally better and, thanks to the exchangeable battery (Extra model from 2020), another enormous increase. In our opinion, this plays a subordinate role, since it is also very good with the V10.

A nice extra is definitely the new LCD display of the Dyson V11, with many useful displays. The V10, on the other hand, comes completely without a display.

If these innovations are important to you and you can spare the change, then you should buy the Dyson V11 Absolute.

However, if you want to save some money, get the Dyson V10 Absolute .

No matter how you decide, you will receive an outstanding cordless vacuum cleaner that will make your work easier every day. In addition, this saves you money and resources in the long run after a high purchase price. You don’t need a filter or a bag. The devices as well as the batteries are tested for 10 years and also prove to be extremely robust in our long-term analysis.

source https://homearama.tv/dyson-v10-vs-v11-what-is-the-best/

10 Best IEMs under 100 Dolla Reviews in 2020

If you’re looking for a budget IEM, you’ve come to the right place. A good sounding, well built IEM doesn’t have to be expensive. There are plenty of solid options that you can find. In this article, we’ve rounded up our Best IEMs under 100 $. We hope this helps you find an IEM that suits your taste.

The Best IEMs under 100 Dolla Reviews and Guide

Thinksound ms01 B005FVDT84

With the ever-increasing popularity of smartphones, the market for headphones is constantly growing. Although most devices come with some basic earbuds, people are always looking for a pair that has better sound quality and more features. After all, those that come with the devices offer mediocre sound quality at best.

Today we’re reviewing thinksound’s ms01 in-ear monitors . Do they offer something that puts them above the rest? Or do they fit into the backpack? We’re also going to be 2 pairs of these $ 99 in-ear monitors , so read through our review, make sure you like them, and enter the giveaway to win a free pair!

How can you make your headphones stand out? Of course, they have to look beautiful and sound great, but there has to be something more. Comfortable, good-looking headphones and great sound quality are a dozen dozen in the market today. So you need something else.

Linsoul BLON BL-03 HiFi B07XKTR849

The BL-03 is raised in the bass range, which makes it very fun. The bass does not whitewash the entire signature, but knows how to put its stamp on bass-hungry tracks, but does not cheat too much output with less bass-intensive music.

It has a good texture and can also score with the reproduction of details. It could be a bit faster and a bit harder in response, but all in all it is very well tuned and especially knows how to please bass lovers, especially in the sub-range.

The bass presses slightly into the mids, which makes them appear fuller and warmer, especially in the lower areas, but does not overshadow them. It gives male voices a full body, just like strings or guitars. As a result, these appear quite natural and not as bright and pointed as with poorer BA drivers.

Due to the increase in the upper mid-range, female voices come to the fore more than their male counterpart, but generally voices are pleasantly positioned in the room with a slight push forward, which I personally prefer. The separation is quite decent, but with more complex music, the BL-03 can quickly get tangled up, which leads to overlay. In general, however, it is suitable for every type of genre, which makes it a very good all-rounder.

The highs are very relaxed and manage to reproduce details well. They do not have excessive hardness and are not too bright. That makes them very pleasant even for a long time. However, I sometimes have the impression that I perceive a bit of scribble and cymbals can sound a bit rattling in some cases.

I like the coordination of the highs in relation to the mids and the bass very much, as they manage to counteract the heat adequately and give the BL-03 a certain lightness. The frequency response also feels quite homogeneous, without strong drops in the transitions, which you often notice with many cheaper multi-friction IEMs.

Overall, I would describe the sound as harmonious, musical and natural, with a sympathetic bass emphasis and good three-dimensionality.

Shure SE215 B004PNZFZ8

The SE215 is aimed at both “normal” music listeners and musicians who want to use the headphones for in-ear monitoring. In terms of presentation, the SE215 is actually more reminiscent of a work tool than a lifestyle object.

The transparent housing reveals a glimpse of the technology inside the earphones. What some perceive as chic is likely to put off fans of classic designs. For testing, however, I also had the transparent model, which is also available in black. A mark on the case shows whether it is the right or left earphone.

The housing itself can be rotated through 360 ° and the cable is reinforced at the end so that it can be bent as required. Incidentally, the cable can be removed and replaced, In the event of a cable break, you do not have to buy a completely new one, but can purchase the cable separately as a spare part.

There are also a large number of optional accessories for the SE215, including adapter cables for iPhone and Android smartphones as well as universal ear pieces to supplement. In addition to the attachments and a cleaning tool, a high-quality neoprene bag is also included in the delivery, in which the headphones are in good hands.

Final Audio Design E2000 B072MK1WDF

The headphone specialist Final dares something. For example, for the last EAR IN (2/2017), the Japanese sent me their exclusive technology carrier among the in-ears, the LAB II, which is the essence of the in-ear development from Final and priced it very ambitiously at just under 4,000 $. With the new models E2000 and E3000, Final is now showing that the company can also do “normal” things.

Whereby normal doesn’t mean common here. Because also Final holds it like many manufacturers who really still develop new technologies themselves: Findings that have been gained in the development of the top models are used in one form or another in cheaper “budget” models.

MEE audio M6 PRO B07B4PR2GD

The MEE audio M6 Pro competes strongly with the SoundMAGIC E10 and is one of the best in-ear headphones under 50 $. You get real added value here. Particularly positive is the detailed and warm sound, the large scope of delivery and the possibility to replace the cables cheaply. The MEE audio M6 Pro is currently the winner, especially if you value good value for money.

The company MEE audio is known for offering the best price-performance from all manufacturers. We have already tested the MEE audio M6 Sport Fi and were already very impressed by the above-average price-performance ratio. The M6 ​​Pro is the successor.

In 2015, the company outdid itself once again by developing a new in-ear that delivers the best price-performance of all the headphones we have tested: The MEE audio M6 Pro.

FiiO F9 Pro B074TXH4KX

The Chinese manufacturer stands for high-quality audio products from the Far East. This is also confirmed with the F9 Pro, which know how to please with a detailed and clean sound. In addition to a transport box, FiiO includes a total of 12 pairs of earplugs with the headphones, which should really make every ear happy with a comfortable fit.

Two cables (3.5 mm and 2.5 mm) are also included and can be removed and replaced if necessary, although this requires a bit of dexterity on the part of the user.

1more Triple E1001 B01A7G35S0

The Triple E1001 from 1more presents itself with attention to detail in steampunk style.

1more Triple E1001 – admittedly, the name sounds a bit bumpy, but we don’t want to be put off by that. In front of me is a jewelry box in which jewels would also feel comfortable. When opening the box, the first glance falls on the sketches, which give a little insight into the world of the designer and show the structure of the headphones with their functions. The in-ear headphones are elegantly designed and have a very elegant metal housing.

When you “rummage” in the box, more small boxes open up and surprise you with more sophisticated accessories: Nine different earplugs are included with the triple, six of which are made of silicone and three of foam. In addition to an airplane adapter and a clip for attaching the fabric-covered cable to the jacket, I also discover a transport box with a magnetic fastener the size of a cigarette packet. For the time being I am perfectly happy!

And what can he do? The same applies to the triple: the right plug must be found before listening for the first time. An extremely important choice, as otherwise it may sound too thin or after a short time pressure-related ear pain may develop.

Lypertek TEVI B07VB46R9Y

With the “TEVI” model, the young Chinese manufacturer Lypertek is involved in the field of true wireless headphones.

The slightly protruding ear pieces, in which the electronics and the battery are located, are unavoidable with this construction method.

Lypertek also relies on mechanical operating elements in the form of wide push buttons at the ends of both earphones. Conscious, because alternative sensors are often accidentally triggered by many users.

The two Tevis travel in a nice fabric-wrapped case that also functions as a charging station thanks to the USB-C connection. The battery capacity is remarkable: in practice, the listeners can play for around ten hours, depending on the volume, with the case extending this playing time to 70 hours (manufacturer information). A quick charge function (15 minutes for two hours of playing time) is also provided.

Other special features include the support of Bluetooth 5, an implementation of the audio codecs AAC and aptX and a high certification of protection class IPX7 – submersion in water up to 1 meter.

Technics EAH-TZ700 B081G74GL6

With the EAH-TZ700 Technics proves an audiophile ear for transparent and balanced sound that literally isolates you from the environment.

Technics really makes you sit up and take notice with the EAH-TZ700 in-ear headphones. After all, the Japanese high-end forge has installed a completely new technology: a ten millimeter large frameless driver is hidden in the cylindrical magnesium housing with a sound outlet made of titanium, surrounded by magnetic fluid and an air control chamber enclosed by a special aluminum membrane, in order to ultimately put a stop to vibrations and distortions .

In addition, according to the manufacturer, it ensures a wide spatial image. Although only one driver is built into the housing, it creates a fabulous frequency response of 3 Hz to 100 kHz on its own. The signal is picked up by the two in-ears using the two cables supplied, which are docked to the golden socket using an MMCX plug-in connection.

For the perfect fit of the in-ears – not only as a prerequisite for comfortable wearing, but also for optimal sound reproduction – Technics contributes a set of oval and round ear tips in four different sizes. The inserts are placed over the upper slightly trapezoidal widening of the sound outlet, which ultimately ensures a secure hold not only on the capsule but also in the ear canal.

The black silicone attachments skilfully close to the same width as the case, so as not to interrupt the elegant and aesthetic design line. But the Japanese also show a lot of taste with the smart Technics brand on the metallic gray surface. They become small pieces of jewelry that literally hide in the ear and gleam through the golden cable socket.

Hifiman RE600 B00DY8BMZ2

The Hifiman RE600 is the big brother of the Hifiman RE400 and is aimed at audiophile music listeners with sophisticated needs. It offers more features and the possibility of symmetrical operation.

Two years ago the RE600 got an update (“V2”) in which the cable was completely redesigned and which now promises even better audio quality and more stability. Since the street price of the headphones has meanwhile been reduced to around half, the RE600 should have become even more interesting for some potential buyers.

WHAT IS THE IMPORTANCE OF IN-EAR MONITORING

At every concert, whether large or small, the audience sees a sound system standing on the stage, which generates the sound for the audience. Depending on the size of the event, it is either very compact or looks like a monster with many speakers that towers high above the audience. But why do more and more musicians have plugs in their ears? There is enough volume, but only for the audience. These plugs, the so-called “in-ear monitors”, are used to provide sound to the musicians.

WHY DO MUSICIANS NEED “MONITORING”?

The term “monitoring” means being able to monitor something and intervene should the need arise. With musicians, it is important to monitor what you want to hear. A singer, for example, is usually not very interested in hearing the drums louder than he already perceives because it is booming from behind him directly in the neck.

A MUSICIAN HAS TO HEAR HIMSELF

As a sander, his own voice is of course much more important to him. In addition, there are instruments that cannot be heard directly on stage. Most keyboards, for example, have no built-in speakers, so that fellow musicians cannot hear what the man is playing on the keys during the performance. The sound is directed exclusively at the audience.

However, the sound on stage is completely different. Because the volume distribution of the individual instruments is not the same. And so the keyboard player would hear the drums louder than himself. Anyone who has ever been on stage knows that you can only deliver the best performance if you can hear yourself or your instrument clearly and understandably. There is monitoring and in-ear monitoring for this.

LARGER CONCERT HALLS REQUIRE MORE TECHNOLOGY

Loudspeakers, microphones and, above all, monitoring did not always exist. But the increasing size of individual concerts and appearances required new and more technology that optimally distributes the music in the room. The catch is that the bigger the event, it became more and more difficult as a band to deliver a good result.

Because you couldn’t hear your own voice anymore, you couldn’t exactly follow what your colleague was playing or singing. The so-called “aux paths” on the mixing consoles helped. The term “Aux” comes from the English “auxiliary” and means auxiliary auxiliary or reserve.

LOUDSPEAKERS FOR THE MUSICIANS

With these auxiliary outputs, it became possible to connect additional loudspeakers, which can be controlled separately without affecting the public address system for the audience. If you look at a stage and see sloping boxes on the floor in front of the singer, you can almost be sure that these are speakers that reproduce what the singer would like. And every musician has his own preferences or ideas. Therefore, it must be possible to regulate all monitor boxes individually. Finally one could hear his voice or his instrument again.

FROM LOUDSPEAKERS TO IN-EAR MONITORING

However, it was extremely loud on stage, as the monitors also provided each musician with volume. The result? It got louder and louder on stage and thus again indefinable, quite apart from the health risks of loud music. Therefore, the further development took place that no more speakers were connected to the mixer, but headphones were used. The advantages are apparent.

On the one hand, it becomes quieter on stage and thus easier for the sound engineer to adjust the sound. On the other hand, every musician does not care how loud the singer wants to hear himself or how powerful the drummer is with his rhythms. And the keyboardist can finally hear his sounds clearly and distinctly. A combination of hearing protection and independent monitor sound.

IMPROVED TECHNOLOGY

In-ear monitoring is further development. In the meantime, modern technology even enables every musician who uses a tablet on stage to adjust and edit their own individual sound in their ears. It is connected to the mixer via a W-LAN network and has access to its own monitor channel via an app.

VARIETY OF PRODUCTS

A wide variety of headphones are offered on the colorful product market, which does not make the selection easy. In principle, you shouldn’t make a mistake and buy small headphones that are called “in-ear” but are built to listen to music on the go. They do not sit firmly and deep enough in the ear and are usually not necessarily built for use on stage in terms of processing.

The sound of such listeners is also intended for canned music, i.e. ready-made, mixed music from the studio. Listeners for the stage are built in such a way that they sit much more tightly in the ear and thus hold better when moving and above all deliver more pressure in the bass range.

QUALITY HAS ITS PRICE

The best-known manufacturers are Ultimate Ears, Fischer Amps, Shure and Sennheiser. The difference in sound is primarily evident in how the frequency response runs and how many paths are built. Roughly speaking, the frequency response reveals whether certain sound areas can be heard amplified or sound lowered.

For example, a drummer likes to hear more bass than a singer. This wish can be fulfilled through the frequency response. In addition, the “paths” are decisive. These reveal how many different areas the listener’s sound is divided into. The more paths there are, the better it can be divided into different frequency ranges, which in turn makes the overall sound cleaner and more differentiated.

GOOD PRICE SEGMENTS

Sensible entry-level models are available from around 100 $. In-ear headphones are custom-made from a price range of around 600 to 700 $. This means that the electronics are built directly into a housing that corresponds to the exact impression of the ear. Such impressions can be obtained from a hearing aid acoustician for around 20-50 $. They are the template for the custom-made system. Perfect fit, no slipping, full use of the sound.

At Musik Wittl you will find a good selection of in-ear monitoring. In addition, you will receive very good advice in our shops so that you get the best system that suits you.

source https://homearama.tv/best-iems-under-100/

Best Car Speakers for Bass and Sound Quality Reviews in 2020 https://t.co/VVHci9ElD5

Best Car Speakers for Bass and Sound Quality Reviews in 2020 https://t.co/VVHci9ElD5

— Home Arama (@AramaHome) October 9, 2020

from Twitter https://twitter.com/AramaHome

October 09, 2020 at 03:16PM

10 Best In Ear Monitors for Singers Reviews in 2020

Those who are live on stage have special requirements for their headphones, because “normal” in-ears are out of place here: high level stability, no distortion and robustness are the most important properties that so-called monitoring headphones have to offer. That they have to seal perfectly is just as important as their – usually – specially adapted frequency response for live environments.

The Best In Ear Monitors for Singers Reviews – Guide and Buy

Shure SE846 B00DIUGW6A

The Shure SE846 promise well-equipped in-ears for professional applications, which also allow private music enjoyment on the go. First-class workmanship and an immense package of accessories make the earphones a flexible tool that is fun and justifies the purchase price. In the end, what counts: attenuation and wearing comfort are great, the sound of the earphones is first class.

Since their frequency behavior can be adjusted, these in-ears are up to almost any playback situation and any musical genre. If you want to treat your ears to real sound luxury and have the necessary change, testing the Shure SE846 is therefore a must.

Shure KSE1500 B016X5T7OU

The Shure KSE1500 offers the highest level of sound enjoyment for demanding PA professionals and hardcore hi-fi fans who are willing to pay a high-end price for this system with a mega-extensive range of accessories. Impressively transparent basses, multi-faceted mid-range resolution and the finest highs make the hearts of sound purists beat faster when playing almost all musical styles.

Sennheiser Pro Audio In-Ear Audio Monitor, IE 500 Pro Clear B07MPS7SJJ

Ergonomic fit, adjustability of the pad depth and low structure-borne noise transmission of the interchangeable cable are factors that make me thumb up for these in-ears. And the scope of delivery with soft case, ear pads and cleaning tool also convinces me.

Sennheiser’s IE 500 Pro In-Ears are really loud monitoring button headphones that offer a wide frequency range and reproduce the mids so precisely that they ensure high speech intelligibility. In one production or another, however, sibilance can be unpleasant. To listen to hi-fi productions with these headphones, the mid-range boost could be too much of a good thing for one or the other user. Beyond this mini point of criticism, the offered sound is well positioned. The Sennheiser IE 500 Pro are impressive monitoring in-ears that, in my opinion, are worth every penny.

64 Audio A6t B01C5TEO96

The A6t is a high-quality in-ear earphone that is aimed at musicians who want to combine high demands on sound quality on stage with the advantages of a tailor-made fit. The sound of the system is outstanding due to the fact that it is equipped with six balanced armature drivers and the pressure relief, but it costs at least 1,500 euros. At the same time, as an audiophile music listener, you are guaranteed to be right here.

InEar StageDiver SD-4 B013S8BXRY

The InEar StageDiver 4 is a thoroughbred in-ear earphone for monitor use. The sound is trimmed so that musicians hear each other on stage and you do that extremely well with this listener. But not only the sound is convincing, with the SD 4 the entire package is right: starting with the fit, through the features, to the fact that the receiver is available in two sizes. All of this makes the SD 4 an excellent tool for the working musician. For many, the only downer is the price, but good tools have never been cheap.

Sennheiser In- Ear Audio Monitor, (IE 400 PRO Clear) B07MBR1NZH

The IE 400 Pro passed their practical test without question. Scope of delivery and design are top, comfort and usability of the seat and handling leave nothing to be desired. In terms of sound, the in-ears convince with fine highs that convey a good sound stage, as well as with a rich sub-bass. Like their smaller sibling, the IE 40 Pro, these button headphones also deliver quite succinctly in the mid-range.

The distortion-free playback, with which I was already impressed by the IE 40 Pro, can also be found in the IE 400 Pro. All those who want a strong bass for monitoring on stage and have no problem with the fact that voice and speech signals can hiss here and there can feel addressed. The bottom line is that the buyer receives an enormous amount of “value for money” because it is a mature product

Westone UM Pro 50 High Performance B071D8FNVF

The Westone UM Pro 50 delivers an excellent overall performance. In terms of sound, due to its target group in the stage area, it is not strictly attuned to neutrality, but rather with its emphasis in the bass area strives for the equally full and contoured sound image with which Westone has established itself in the professional field over the years. Nevertheless, the listening experience is excellent due to its richness of detail and precision, even when it comes to pure musical enjoyment. Here you can immerse yourself deeply and genre-spanning in the music!

With a street price between 540 and almost 700 euros, the UM Pro 50 is a small investment. In terms of sound, you are rewarded with a comprehensibly higher sound quality than in the price range around 200 euros. I don’t want to judge to what extent this leap in quality is worth several hundred euros to you. Often enough, the last qualitative percentage points require a particularly high effort. A look at competitors such as Sennheiser ( IE 800 S – to the test ) or Shure ( SE846 – to the test ) shows that you could also dig deeper into your pockets.

Westone AM Pro 30 Triple B01ENK729O

The AMPro30 is a recommendation for everyone who has always felt too separated from the outside world while playing with in-ear monitoring. Ambient noises are not only perceptible during breaks, but also when the music is playing – ideal for jam sessions, church services and all kinds of occasions where contact with the audience or fellow musicians is important. In terms of sound quality and workmanship, Westone has also done everything right – but all for a very high price.

Mackie MP-120 B079C7X2JH

With the Mackie MP-120, the traditional American manufacturer offers good in-ear headphones at an affordable price. The MP-120 works just as well as an everyday listener as it does as a stage monitor – if you can live with the withdrawn mids and the hissing tendency. Those who like crisp bass are well served here, those who prefer not to indulge in the finely drawn highs I give special praise for the fact that Mackie delivers its MP series headphones, which are of different prices, with identical accessories, which are really very high quality!

Mackie MP-360 B083MXMY92

If you want to hear what’s really going on in your favorite tracks, put the Mackie MP-360 in your ears! In terms of concept, they are real IEMs, developed for musicians or sound engineers on and in front of the stage. Headphones are needed there that allow reliable sound assessments and that is exactly what the MP-360 delivers. You will find a nice middle way between this analytical accuracy and a sound image that also allows relaxed listening to music.

Since the MP-360 sound good with almost every style of music, this makes it a real all-rounder, only fans of really deep and fat basses should keep their distance. But if you want to hear music the way the artist intended, you will be amazed at the many fine details that you can hear in songs with the MP-360

Mackie MP-240 B079C9STWS

As true monitor headphones, the Mackie MP-240 has committed itself to sound neutrality. If you are looking for a sound that impresses, you are better off with the bass-stronger (and cheaper) Mackie brothers MP-120 and MP-220 . On stage, however, the MP-240 has two advantages: it still sounds pleasant at high volumes and the individual frequency ranges can still be bent properly with the EQ of the monitor mixer if necessary. Everyone has to decide for themselves whether the black piano lacquer look matches the stage outfit.

Audio-Technica ATH-E50 B01AXSYH2U

Many headphones are advertised with the word “professional” and the Japanese audio specialist Audio-Technica also uses this word in the description of their in-ear headphones from the ATH-E series. But here it is not used as a (sometimes daring) advertising statement, it is the description of the targeted user: The equipment and sound of the ATH-E listeners are aimed at professional musicians and producers and they are usually looking for headphones with a neutral, unadulterated sound character. There are currently three ATH-E earphones, the ATH-E50 tested here is the middle model. We also tested the top model ATH-E70 (for review) .

Audio-Technica ATH-E70 B01AXSYIVA

The Audio Technica ATH-E70 is not a listener that plays its way into the foreground with power and pressure. But thanks to its well-balanced sound, you can always hear “what’s going on” and is therefore a great listener for everyone who needs to hear what’s going on: From this point of view, the term “professional” in the product description is quite appropriate, because the ATH -E70 is a precise tool for musicians on stage or producers in the recording studio.

Shure SE 535 Wireless B07C7HNH88

The Shure SE535 was previously suitable for moderators, speakers and singers. Now, in the wireless version with Bluetooth connection and remote control for smart devices, it gets an additional boost of everyday proximity for daily use on the road. As high-quality workmanship and scope of delivery as these in-ears are, the use of their remote controls is just as complicated in practice.

Therefore, to be on the safe side, those interested in the Shure SE535 should make sure that they are comfortable handling the remotes. The fact that SBC is used as the Bluetooth codec instead of aptX is also a small downer. In terms of sound, on the other hand, even heavy mid-heavy guitar music can be heard differently with these in-ears,

Factors To Consider When Buying In-Ear Monitors For Singing

High quality sound

There are a few factors that, taken as a whole, are responsible for the high sound quality of in-ear monitoring systems. These include optimal volume, resistance to feedback, protection of the hearing, reduced vocal stress and less interference with the audience mix.

Optimal volume

One of the most common requests to monitor engineers is, “Can you make me louder ??” A request that they cannot always comply with. There are many factors that determine how loud a signal can be when using stage monitors: the size of the amplifiers, the power of the loudspeakers and the gain. Another point that can make it difficult to hear yourself properly is the volume level on stage.

Singers often only rely on stage monitors – in contrast to guitarists, bassists or keyboardists, whose instruments are generally amplified. And drummers are naturally louder, even without amplification. The usual volume battles are sometimes inevitable, as every musician is always anxious to hear himself out of this confused music.

The brilliance of the voice is often neglected when other instruments are added to the monitor mix. Pianos, acoustic guitars and other instruments that also rely on a monitor are then at odds with the singing voice to be considered in the mix. An in-ear monitoring system, which isolates the artist from high stage volume and poor room acoustics, allows him to achieve studio quality sound – and that on stage!
The monitor mix can then be adapted to personal taste without the artist having to assert himself against the above factors.

Feedback resistance

If higher volumes are to be implemented using conventional monitor boxes, you can add more amplifiers and more speakers, but you cannot bypass the laws of physics. The concept of gain-before-feedback describes how loud a microphone can be before feedback occurs.

The further you move away from the microphone, the closer the microphone is brought to the loudspeaker or the further the loudspeaker is from the musician, the lower the resistance to feedback. Let’s imagine a typical stage scenario: the microphone is close to the mouth, that’s good.

The microphone is close to the speaker, that’s bad. The monitor is relatively far away from you, which is also bad. Feedback occurs whenever the sound that enters a microphone is reproduced by a loudspeaker and then picked up again by the same microphone. For a reasonable monitor volume, however, you definitely need some gain.
With in-ear monitoring there are none of these feedback problems. The loudspeakers sit directly in your ear canal and therefore quite a distance from the microphone. And without the threat of feedback, the volume can be increased as required.

Protection of hearing

Long-term exposure to high sound pressure levels can impair your hearing. Many artists use hearing protection such as ear plugs to protect their hearing, but these often change the frequency response. In-ear monitoring provides protection that comes close to that of earplugs, but with the difference that small micro-speakers are stuck in the earplugs. The monitor volume has thus moved into the area of ​​responsibility of the artist on stage. So loud levels should be a thing of the past. We also recommend using a limiter for even more effective hearing protection.

Reduced vocal stress

Another problem besides the volume is the great vocal stress on the singers with normal stage monitors. To compensate for their volume, many singers feel compelled to sing against it with more power than would be normal or healthy. Anyone who makes a living by singing can imagine the consequences of losing their voice. Protecting the voice should therefore always be a high priority. In-ear monitoring systems are the perfect protective measure for all singers.

Stereo monitoring

A distinct advantage of most in-ear systems is the ability to hear stereo. This does not necessarily fit always and everywhere, especially if only a limited number of mixes are available, but a monitor mix in stereo generally provides an accurate image of the environment. After all, we spend our entire lives in stereo, so it makes sense that a stereo mix would increase the perception of a natural soundscape. In-ear monitoring in stereo can also help reduce the volume.

Interference with the mix of the audience

But in-ear monitoring not only has advantages for the musicians on-stage. An undesirable side effect of stage monitors is that sound radiates from the stage into the audience. The loudspeakers in particular emit the low frequencies in all directions. This situation complicates the already demanding task of the FOH engineer, who has to fight against the loud levels on the stage in order to drive a clean mix for the audience.

The low frequencies emanating from the monitors wash out the mix and can also impair the intelligibility of the vocals, especially in smaller locations. This is also a point that clearly speaks in favor of using in-ear monitoring.

Portable construction

Easy to transport – that is an important argument e.g. B. for artists who travel a lot. Let’s imagine an average stage monitor system: 3-4 wedges of 20 kg each and then one or the other amplifier of 25 kg each – that comes together quite a bit. And an in-ear monitoring system? It fits comfortably in every pocket. Another nice side aspect of IEM is the aesthetics.

Finally, bulky stage monitors and cabling are no longer necessary; the stage looks much tidier. By the way, this point is especially important for bands that are B. performing at weddings, in churches or at important social occasions, where a professional appearance is just as indispensable as good sound.

Freedom of movement

Stage monitors create a sweet spot; so a certain point on the stage where everything sounds pretty good. But if you only take a step to the left or right, that is suddenly no longer the case. This is due to the directional nature of the speakers, especially at the high frequencies. Using in-ear monitoring is like using headphones – the sound is always right where you are. And you have this effect in every location. Since professional earphones effectively block out ambient noise, only good sound remains.

Direct control

Probably the biggest advantage of in-ear monitoring is that you can control the mix directly. Sure, the musician still has to rely on the sound engineer to do the fine tuning, but in-ear monitoring gives him the opportunity to make some adjustments himself. These include the volume or the ability to choose different mixes. If the entire mix should now be louder, the artist can regulate the volume directly on the bodypack instead of trying to convey this wish to the monitor engineer with wild gesticulations.

source https://homearama.tv/best-in-ear-monitors-for-singers-reviews/

Best Car Speakers for Bass and Sound Quality Reviews in 2020

Good car speakers ensure a good sound experience in the car and are therefore important components of a car hi-fi system.

What’s the Best Car Speakers for Bass and Sound Quality for you? The most popular car speakers can be found in the comparison table. You can find the current top product here. Any questions? The purchase advice provides you with the most important information.

Car speakers: How to find your personal test winner

In contrast to classic stereo systems for home use, car speakers do not need a housing . In some cases, it can therefore happen that you are confronted with critical information when using the term auto boxes. In particular in relevant forums, some take the view that this name is inappropriate for car speakers due to the lack of a housing.

When it comes to buying car speakers, there is a huge variety to choose from. Especially for laypeople, the offer is hardly manageable, and many people are initially a little overwhelmed with technical terms such as impedance, sound pressure level or car tweeters . This buying guide gives you good insights into the most important selection criteria.

Best Car Speakers for Bass and Sound Quality type

The variety of models is amazing. Different systems are available for high and medium frequency playback :

• 1-way loudspeaker = conventional loudspeaker (usually installed in the car ex works)
• 2-way loudspeaker = component system
• Coaxial loudspeakers = special form of component systems
• 3-way loudspeaker = system with 3 loudspeakers per unit

Size and installation depth

If you want to replace the speakers installed ex works and avoid major modifications, you should measure the exact size of the old ones before buying . The installation depth is also important; the specification is usually made in millimeters (mm). In certain places you have to consider a rather small installation depth, this is the case for example in the car doors. The installation depth can vary between approx. 45 and 66 mm depending on the model .

Impedance

This is the electrical resistance in alternating current technology and is specified in ohms. Match the amplifier and speakers. If you combine, for example, a 4-ohm loudspeaker with an amplifier with a higher resistance, this can lead to reduced performance or failure of the loudspeaker in the long term.

Sound pressure level

Here the information is given in decibels per watt at a distance of one meter. The sound pressure level or characteristic sound pressure indicates how strong the sound affects. From this, the efficiency can be derived, which also increases with increasing sound pressure level. At 92 dB the efficiency is, for example, 1%, at a sound pressure level of 102 dB this value increases to 10%.

Performance and resilience

In the product description, the manufacturers indicate the power in watts. However, a high number of watts is not automatically a sign of high performance; this information is usually the peak load capacity. It thus shows the maximum performance the respective model is capable of for a brief moment. The nominal or RMS power , which indicates the average power value, is much more meaningful .

These are the differences in car speakers

The selection of different models ranges from 1-way loudspeakers to 3-way systems . Below you will find the main advantages and disadvantages of the most important speaker models.

Component system

A component system is a set of individually built-in loudspeakers, so there is a second sound source for medium frequencies in addition to the car tweeter. Since it is usually a set of 2 loudspeakers, the term 2-way loudspeakers is often used.

This model has the following advantages :

• Different components can be combined as desired
• Quality sound
• Often cheaper than coaxial speakers with the same sound quality
• Optimal alignment to the driver possible
• The disadvantages are the more effort involved in the installation and the fact that you have to install the tweeter separately.

Coaxial speakers

The nested construction of this variant is characteristic. Coaxial speakers are designed as a space-saving unit, the slightly smaller tweeter is located in the middle of the woofer. All tones thus come from a common sound source.

You benefit from these advantages :

• Broad-spectrum of frequencies
• Relatively uncomplicated installation
• little need for space

Unfortunately, there are also disadvantages to consider: It is not possible to focus directly on the driver. Installation in the footwell can also result in sound losses.

This is the best coaxial speaker

Three-Way Sound Speaker System B000230LC2

• Features
• 360 watts
• 3-Way Speakers
• PRICE RANGE: Under $25

3-Way Car Speakers

A 3-way system is also a compact design. Tweeters, woofers and mid-range speakers are built into each unit, so 3 sound sources generate the tones here.

The following advantages are relevant:

• Bass tones come into their own
• Broad-spectrum of frequencies
• Relatively uncomplicated installation
• One unit, therefore little space required

Here, too, there are the disadvantages of the lack of direct orientation towards the driver and the possible loss of sound when installing in the footwell.

Best 3-Way Car Speakers

Pioneer TS-A1670F 3-Way 320 Watt A-Series Coaxial Car Speakers B07GFQN1MM

Product features

• Diameter 165 mm
• 6.5 in
• Max. Power 320 watts
• Nominal load of 70 watts
• The frequency response of 37 Hz
• Frequency response up to 24,000 Hz

Car speakers in comparison: this model suits you

Which hi-fi speakers suit you and your vehicle depends largely on your expectations. In particular, your requirements with regard to the sound and alignment of the speakers are relevant aspects for the purchase decision. Let the following application examples inspire you.

1-Way Car Speakers for the frugal

Most vehicles are factory-fitted with classic 1-way speakers, these are also known as axial speakers. These simple models are comparatively cheap compared to the more complex variants and can also be installed relatively easily.

They play medium and high frequencies equally , the sound quality of these speakers is usually rather mediocre due to the simple construction. If you only want to hear the traffic news or if the car radio is usually only running quietly in the background, this variant is absolutely sufficient.

This is the Best 1-Way Car Speakers

Visaton BG20-8 8″ Full-Range Speaker with Whizzer Cone 8 Ohm B000K8CE88

Product features

• Diameter 200 mm
• 8 inches
• Max. Power 70 watts
• Nominal load 40 watts
• Installation depth 81 mm
• Frequency response of 35 Hz
• Frequency response up to 18,000 Hz

Coaxial speakers for beginners

Are you looking for a car loudspeaker that covers a wide frequency spectrum and yet is easy to install? Then you should take a closer look at the advantages of coaxial systems. In this variant, the membranes are housed in one unit , so installation is just as uncomplicated as with the simple speakers.

Due to their compact design, these systems take up relatively little space, so they can also be installed in smaller vehicles. Depending on the version, it can be placed in the dashboard, as many models are also suitable for installation locations with limited space.

3-way system for bass enthusiasts

In the 3-way loudspeaker there are tweeters, woofers and midrange speakers in one unit . The latter should offer better reproduction of the bass tones and thus bring out the bass better in pieces of music. At the same time, you benefit from easier installation due to the nested design.

Component system for the discerning

If you are not satisfied with the sound quality of the coaxial variant and prefer placing the loudspeakers specifically for the driver, the component system comes into consideration. The individual loudspeakers can be installed in the vehicle independently of one another . For example, you can place a woofer in the footwell while you attach the car tweeter at head height and align it with the driver. This should promote a more plastic and thus better sound.

That is the best component system

JL Audio C2-650 6.5-Inch 2-Way Component Speaker System B0036D1DQI

Product features

• Quality materials used.
• High output pair.
• Fully adjustable crossover.

Bluetooth speakers for smartphone users

Basically, Bluetooth speakers are intended for mobile use. Would you like to do without the car radio and prefer your smartphone for music playback? Then bluetooth speakers are a good choice. No cable is used here, as the transmission takes place via radio .

This is the best bluetooth speaker for smartphone users

JBL Charge 4 – Waterproof Portable Bluetooth Speaker B07HKQ6YGX

Product features

• Battery life 20 h
• 2.0 stereo
• 30 watt nominal load
• Bluetooth 4.2
• Smartphone charging function (power bank)
• splash-proof
• Hands-free function
• Line-In (3.5mm jack)

Car speakers put to the test: that’s what Stiftung Warentest & Co. say

The results of serious product tests by ÖKO-TEST and Stiftung Warentest are a great help for many consumers in their search for a good product. Unfortunately, the renowned experts from both institutes have not yet looked at the comparison of car speakers. In the loudspeaker category, Stiftung Warentest can at least see the latest test results for the comparison of different Bluetooth boxes carried out in 2019 . Stiftung Warentest: 35 Bluetooth speakers under the microscope

This test is definitely interesting for smartphone users. Bluetooth boxes offer the advantage that they can be used mobile and are therefore ideal for traveling. If you don’t want to convert your car and don’t use the car radio anyway, the Bluetooth box can also be used in the car and play music from your smartphone. According to Stiftung Warentest, the best specimens deliver a voluminous and well-balanced sound.

The testers divided the tested boxes into large and heavy as well as small and light test models. The best candidate for the large speakers was a copy from B&O. The experts rated the very good sound and ease of use as positive . Only the somewhat long charging time of around 6 hours clouded the overall good result somewhat.

The test winner among the small speakers was a compact model from Bose. It convinced in this category as the best candidate with overall good results. The testers rated the short battery charging time and the very good stability as positive . They found the sound a bit dull, which is why the experts gave the overall rating satisfactory.

Car & Hifi tested 3 coaxial speakers

In the print edition 5/2019, the specialist magazine Car & Hifi published a car speaker practical test. The testers compared 3 different models from the manufacturer AXTON and were absolutely convinced of the performance of all models. The products of this manufacturer are among the most popular branded speakers in Germany in the entry-level segment. According to the magazine’s testers, the speakers tested are solid car speakers with good sound . All products tested were therefore given the Best Product rating.

The loudspeakers performed very well in the practical test and in the measurement laboratory and delivered good results overall. The 13 cm system, for example, showed very little distortion and all products were convincing in terms of sound with an overall good performance.

Car speakers: this is our price tip

JVC CS-DF620 B084JKPSQY

Product features

• Diameter 170 mm
• Max. Power 300 watts
• Nominal load 30 watts
• Installation depth 44 mm
• Frequency response of 30 Hz
• Frequency response up to 22,000 Hz

Buy cheap car speakers: that’s how much you have to spend

Cheap or expensive? As a look at the test results of the specialist magazine Car & Hifi shows, there are definitely inexpensive speakers with a good price-performance ratio. How much you have to spend on new car speakers therefore not only depends on your requirements for a good sound experience. It is also crucial which speaker variant you choose and whether you prefer a certain brand.

Loudspeakers for little money: up to around 35 $
Simple axial loudspeakers are available at low prices; you can find copies with a satisfactory sound from around 20 $ . However, you cannot expect any extraordinary sound experiences with these versions. However, be careful with overly tempting offers. In this segment, individual coaxial loudspeakers from suppliers such as JVC and Pioneer are sometimes also available.

This is the best car speakers under 35 $

JBL Stage 602 B01C69NIVU

Product features

• Diameter 165 mm
• 6.5 in
• Max. Power 240 watts
• Nominal load 40 watts
• Frequency response of 55 Hz
• Frequency response up to 21,000 Hz

Good middle class: best car speakers under 50 $

If you invest a little more, the speakers usually also offer better quality. In the middle price segment, for example, you will find good coaxial models and 3-way speakers at a fair price. The test candidates from Car & Hifi are also located in this category and in the practical test proved to be solid speakers with good sound .

This is the best car speakers under 50 $

JVC CS-DF620 B084JKPSQY

Product features

• Diameter 165 mm
• 6.5 in
• Max. Power 220 watts
• Nominal load 40 watts
• Installation depth 46 mm
• Frequency response of 60 Hz
• Frequency response up to 20,000 Hz

Premium class for excellent sound: Best car speakers under 100 $

For more complex systems you have to reckon with prices starting at around 100 $. The range is open at the top, since when choosing a component system you can also combine the individual loudspeakers as you wish. With a little specialist knowledge and the right budget, you can put together an excellent car hi-fi system. In this category you can expect complex speaker systems with high wattage, rich bass and excellent sound .

This is the best car speaker from 100 $

Infinity REF6522IX 6.5 B01DSIKGJA

Conclusion: the best car speakers for you

If you follow the tips and hints in this buying guide, nothing stands in the way of buying the right car speakers. Pay particular attention to the following points:

• There are inexpensive speakers for less than 35 $ and for good mid-range models you have to expect a purchase price of at least 40 $
• Complex loudspeakers and high-quality systems are available for around 100 $ and more
• Coaxial speakers are designed as a unit and are suitable for beginners
• Component systems can be optimally aligned with the driver
• 3-way systems are supposed to emphasize the bass better

source https://homearama.tv/best-car-speakers-for-bass-and-sound-quality-reviews-in-2020/

10 Best Open Back Headphones for Gaming Reviews in 2020

It’s no longer a secret: headphones offer you a much better sound quality compared to headsets.

But the question is: which ones are good for what? Our Overear headphones comparison helps and saves you annoying rum searching and reading long test articles.

So if you ‘re looking for the best headphones for undisturbed gaming , then you’ve come to the right place. You don’t yet know exactly which construction you want or are you short of money?

No problem, we have a selection for every budget and explain the most important specifications that you must pay attention to when buying good headphones. We have targeted both a range of on-ear and over -ear headphones, and we also have open and closed versions in our headphone comparison.

You have no idea what we’re talking about? No problem, because in our purchase advice we explain the advantages and disadvantages of the individual specifications in great detail. Have fun with our current headphone comparison!

The Best Open Back Headphones for Gaming

List

This is how our headphones comparison works: Below you will find all headphones that appear in our comparison clearly listed with the most important information. Below we have taken a closer look at each headphone individually for you, so we will give you a short individual review of the respective model.

We have divided our headphones comparison into 3 price categories: Cheap headphones (up to a maximum of a little more than 50 $), the middle class (up to max. 160 $) and the premium class with everything over 150 $. We have tried to sort the list below from cheap to more expensive as best we can. After the individual reviews, you will find our purchase advice & the guide, in which we clarify all important questions about gaming headphones. But now have fun browsing!

Best Open Back Headphones for Gaming under $ 50

It doesn’t always have to be the luxury version, sometimes cheaper models also offer an excellent price / performance ratio. It is also worth taking a look at the entry-level class in the audiophile drug, because this sector also offers both closed and half-open headphones in a wide variety of designs and objectives. Whether bass-heavy monster, balanced sound artist or portable all-rounder, here we want to present some interesting headphones for gaming that are available for comparatively little money.

Samson SR850: Top gaming headphones for beginners B002LBSEQS

• Construction: semi-open
• Headquarters: Overar
• Weight: 273g
• Impedance: 32 ohms
• Sensitivity (SPL): 98 dB
• Driver: Dynamic 50mm
• Foldable: No

The Samson SR850 are semi-open headphones with large velor ear cushions, a thin headband and excellent sound quality for this price. They sit pretty tight on the head, unfortunately the cable cannot be removed and the sound signature is pleasantly neutral. The main disadvantages are the somewhat inferior workmanship, the tight-fitting ear cushions and the non-adjustable headband. For the price, that’s complaining at a high level. If you can live with it, the Samson SR850 will give you great affordable gaming headphones!

The Samson SR850 are great for beginners who want to try out headphones while gaming. Especially useful for hobby DJs or studio work. Purchase recommendation for everyone who would like to test gaming headphones as an alternative!

Superlux HD681: Best headphones for listening to music B002GHIPYI

• Construction: semi-open
• Headquarters: Overar
• Weight: 276g
• Impedance: 32 ohms
• Sensitivity (SPL): 99.04 dB
• Driver: Dynamic 50mm
• Foldable: No

One can argue about the design of the Superlux HD681, but less about the audiophile quality, because the Taiwanese manufacturer Superlux has produced a really fine piece of hardware at a low price with its HD681. With an impedance of just 32 ohms, the HD681 can also be conveniently operated with a smartphone and the partially open design isolates the sound well enough to have fun with it on the go.

The stable, but getting used to processing of the case with similarities to the AKG K240 MKII already leads to speculation on the excellent sound of the HD681, which offers a warmly tuned sound with rich bass and clean mids. The 50mm transducers play dynamically and powerfully, making it fun to gamble with the HD681. Only the highs are sometimes exaggerated and, like the somewhat cheap-looking padding of the ear cups and the non-replaceable cable, are clear minus points.

The performance offered is unbeatable for the price and those who can live with the design get excellent semi-open headphones and an entry-level drug into the HIFI area. The solid workmanship of the headphones ensures that you can enjoy the Superlux HD 681 for a long time.

Audio-Technica ATH-M30x: Great entry-level model for gamers with a DJ attitude B00HVLUQW8

• Design: Closed
• Seat: Over Ear
• Weight: 265g
• Impedance: 47 ohms
• Sensitivity (SPL): 98 dB
• Driver: Dynamic 40mm
• Foldable: Partly

The Audio-Technica ATH-M30x are budget studio headphones that offer you precise, neutral sound. They are designed for recordings in a recording studio and, with their solid construction, shield your ears from ambient noise as far as possible. Therefore, of course, they are also ideal for gaming!

The M30X offers a surprisingly high fidelity for their price range but have a poor soundstage because of the closed construction. These headphones only provide passive isolation. High tones are well isolated, unfortunately, the M30X is not sufficient for noisy environments such as trains or on planes. You have no sound loss, but the M30X is still not recommended for quiet offices.

MIDDLE CLASS: Best Open Back Headphones for Gaming under $ 150

Anyone who likes it a bit finer than the entry-level class, often listens to high-resolution music and generally attaches great importance to quality without wanting to burn a hole in their wallet will find what they are looking for with the mid-range headphones. There is clean quality at a fair price and a great price-performance ratio

AKG K 240: The classic B0001ARCFA

• Type: Partially open
• Seat: Over Ear
• Weight: 284g
• Impedance: 53.95 ohms
• Sensitivity (SPL): 90.46 dB
• Driver: Dynamic 30mm
• Foldable: No.

The name AKG should be familiar to most and the K240 should also be no stranger to many, because these headphones have been on the market for what feels like forever. Since its introduction, it has been improved again and again and brought to the market as a new version, and you can tell it is technical maturity and many years of fine-tuning in every fiber.

The Varimotion 30mm sound transducers play precisely and powerfully and are simply fun to listen to. The crisp basic setting of the K240 is responsible for the fact that the fine highs and details are quickly diverted to the dynamic play with well-resolved mids and lows. The powerful coordination is fun when playing and dynamically transports what is happening on the screen to the ear, but the AKG K240 with its 55 ohms is also recommended for listening to music on the move, if the design is not off-putting.

After all, the futuristic-looking headphones are not for everyone, but they comfortably surround the ears with their thick cushions and insulate well despite the semi-open design. The slim design with the two flexible metal brackets and the metal applications on the outside of the sound transducer look pleasantly retro and can withstand a lot. The classic from AKG is not a regular guest in many studios for nothing, but it should also spread more and more among gamers with the offered qualities.

Beyerdynamic DT 990 Pro: studio headphones in the middle price segment B0011UB9CQ

• Design: Open
• Seat: Over Ear
• Weight: 360 g
• Impedance: 250 ohms
• Sensitivity (SPL): 96 dB
• Driver: Dynamic
• Foldable: No.

The Beyerdynamic DT 990 PROs are a blast for their price: The parts are extremely comfortable, have a great sound and a nice long cable. The huge, open ear cups give you a very haunting soundstage and they also look cool. The sound profile of the DT 990s is very neutral and unfortunately only the bass is a bit weak. But if you’re looking for clear, clean sound, you’ve come to the right place. Warning: These things knock you out with 250 ohms, so think about an amplifier before buying!

If you’re looking for headphones for at home, the DT 990 PROs are the right choice for you. At the price point, you should use them not only to gamble but also to listen to music or watch films.

Audio-Technica ATH-M50x: Extremely flexible headphones B00HVLUR86

• Design: Closed
• Seat: Over Ear
• Weight: 340g
• Impedance: 38 ohms
• Sensitivity (SPL): 99 dB
• Driver: Dynamic 45mm
• Foldable: yes

The Audio-Technica ATH-M50x are studio headphones with an excellent V-shaped sound character: both bass and treble are emphasized, with the middle tones being reproduced solidly. The two large ear cushions ensure excellent noise absorption, the processing of the hard plastic is very robust and resistant. The M50X are convincing in terms of sound across the board: You get a balanced audio reproduction with the right amount of bass, without distortion.

They may seem a bit bright to some, but the high quality sound should appeal to fans of any genre. Very high quality headphones with outstanding sound that are also suitable for everyday use on the go. I’ve been using it for months at home while gaming and I’m completely satisfied! Clear recommendation from us, best to buy in an Amazon sale! Oh yes: they can also be folded together.

PREMIUM: HEADPHONES FOR ENTHUSIASTS FROM 160 $

The upper class is something for real enthusiasts: Whether high-resolution headphones with high demands on the sound card like the Sennheiser HD600, flexible solutions like the Beyerdynamic Custom Studio or handcrafted quality like the Audio-Technica ATH-A1000Z, individualists will find what they need here.

Sennheiser HD599: Almost like cheating in FPS games B01L1IICR2

• Design: Open
• Seat: Over Ear
• Weight: 250g
• Impedance: 50 ohms
• Sensitivity (SPL): 10 6 dB
• Driver: Dynamic
• Foldable: No

The Sennheiser HD500 series is almost legendary. Here you get open headphones that combine sound quality, comfort, aesthetics and high-quality workmanship. Such a sound quality combined with high quality materials will be difficult to find in this price range. The sound of the HD599 has more details and a higher resolution than older models.

We recommend these headphones to anyone looking for extremely comfortable headphones with precise sound quality and a wide variety of sounds. The open design is of course not suitable for commuters or for listening to music outside the home, otherwise you will have problems with other people ;-). All in all: pure sound paired with a noble look and good workmanship. That’s why they are among the best over-ear headphones for gaming!

beyerdynamic Amiron home: Headphones with a pleasant sound after work B01LZQ8N6E

• Design: Open
• Seat: Over-Ear
• Weight: 340g
• Impedance: 250 ohms
• Sensitivity (SPL): 102dB
• Driver: Dynamic
• Foldable: No.

The Amiron Home was designed to give you the ultimate sound experience for your home, whether you are listening to music or watching a movie. The Amiron are definitely among the headphones with the highest level of comfort and the best fit in their class. They really bring you a perfect sound quality and processing quality as well as the selected materials are sensational.

In general, the sound of the Amiron is very pleasant (it won’t be “stressful” for your ears in the long run!), With no tones being exaggerated. Especially the mids come into their own, the basses are sufficiently full, you should only consider purchasing an amplifier or DAC for perfect highs. But you can also get along well without an amplifier, as long as your mainboard or sound card supports 250 ohms.

Admittedly, due to their open design, these headphones are not suitable for people who want to take their headphones with them when they are on the go. For everyone else, the Amiron are world class. For the price, in addition to gaming, you should also listen to music or watch films more often, as they are otherwise a bit too expensive. Perfect after-work headphones for gamers who also listen to music!

HEADPHONE PURCHASE ADVICE: EVERYTHING YOU NEED TO KNOW

Here we explain all the important technical terms and special features that you should pay attention to before buying headphones for gaming. You will also find information on the advantages and disadvantages of the construction methods, important information on the subject of impedance and valuable tips on “Do I need an amplifier for my headphones”. When you’re through here, no more questions should be left unanswered.

Headphone designs explained: which ones are suitable for gaming?

Anyone who has ever looked around the audio department of one of the well-known technology markets will have noticed that there are significant differences between the headphones on offer in terms of design and size. It is not just a matter of taste which type of headphones you get, there are tangible differences between the individual types.

Below you will find the various popular types of headphones. There are basically three form factors: over-ear , on-ear and in-ear , with each design having its own advantages and disadvantages.

Over-Ear:

The largest headphones among the three types completely surround the ear, usually have soft padding and by far the best sound. But they are also quite heavy and the most expensive of the form factors. Nevertheless: If you want the best possible sound, you can’t ignore the Overear headphones and none of the other headphones pull you into the game like a well-isolated Overear.

On-Ear:

These headphones sit on the ears like the Overear headphones, with “On-Ear” really on the ears means. Although you get a little more of your surroundings, the constant pressure on your ears is usually uncomfortable in the long run. In addition, the sound doesn’t sound as full as with over-ear headphones. However, the weight is lower and on-ears are a bit smaller, which makes them more portable.

Such headphones are especially worthwhile if you are on the road a lot, still want good sound and still have to be able to hear something of the environment, for example in traffic. For gamers who use the headphones primarily on the PC, this type of construction is therefore not ideal, as potential is wasted here. However, if you want to switch between smartphone and PC, you should take a look at the on-ear headphones.

In-ear:

Dhe in-ear headphones have long been the state of the art when it comes to MP3 players or smartphones: light, small and decent sound for on the go. However, if you play or work with such headphones all day, you will find the constant wearing in the ear uncomfortable and the sound cannot be compared with the other two due to the design.

However, more and more in-ear headphones are coming onto the market that have several sound transducers installed on each side and hardly have to hide behind the larger competitors. The smaller transducers also mean a lower electrical resistance, so that the models can be operated without an amplifier. The focus on mobile use remains with the most modern in-ear variant, The in-ear headphones are also very suitable for occasional use on the PC. Many pro gamers usually use in-ears in combination with over-ears.

In summary, it can be said that over-ear headphones are particularly suitable for gaming , which on the one hand shield you well from the environment and on the other hand offer the best, defined sound (keyword: sound quality).

On-ear headphones are intended for jogging and are especially recommended for people who wear glasses ! Unfortunately, it is just as uncomfortable to wear in the long run as in-ear headphones.

The above-mentioned categories are further subdivided into the category of open and closed construction methods, which of course also has a significant effect on the sound. The open design is mainly offered for over-ear headphones, while on-ear headphones are more semi-open or closed.

Open or closed headphones: which is better for gaming?

You can easily tell whether you have closed back or open back headphones in front of you by whether the back of the headphones is completely closed or permeable. The difference from the sound is, however, much more pronounced, so that the choice has to be considered very carefully for this aspect:

Open back or open headphones:

These headphones do not have a closed back, but rather leave the back of the ear cups relatively open. The sound can spread unhindered here and the sound transducer can work with the circulating air, which significantly improves the sound spectrum, but you can also clearly hear what is happening around you. External noises penetrate your ear more easily and can be quite annoying with maximum concentration.

Your fellow human beings can also clearly hear what you are hearing on your headphones and thus hear both the agreement on Teamspeak and the embarrassing Justin Bieber track. This is absolutely no disadvantage for gaming at home in your room, but open headphones are not recommended for enjoying music in the subway or playing in the living room in front of the family.

If you have the free choice and want to use the headphones almost exclusively at home in your own room, you should opt for the open design, which, thanks to the airy and spatial sound, can represent a game world much better than a closed design. The closed construction, on the other hand, has more “bangs” and so not only the action fan should try a representative of the two variants, because this is also about the subjective impression of what you like!

Closed back or closed headphones:

The closed headphones isolate the user much better from the ambient noise, but the sound also has major problems leaving the headphones and this leads to resonances, which makes the acoustic impression not quite as open and airy as with open headphones.

Here the perceived acoustic field around you is much smaller than with open headphones and the sound seems to originate more “in” your head than around you, but the bass in interaction with the resonances in the closed room is much more powerful and fuller.

Wireless headphones :

With the advancement of wireless standards such as Bluetooth aptX, the use of wireless headphones has also spread.

Not only has the sound improved significantly compared to earlier models, the ability to move around your own apartment almost without restriction and listen to music via Bluetooth has become firmly established in recent years due to the increased transmission power.

Most wireless headphones also offer the option of connecting them by cable and thus making them independent of the battery when you don’t need the freedom of wireless headphones. Nevertheless, wireless headphones currently rank behind the wired models in terms of pure sound quality, which can also benefit from amplifiers.

Since you usually sit at the PC while gaming, there is actually no reason to accept the additional weight of the batteries and the poorer sound quality and you should resort to a wired variant.

What does THD mean and why is there no frequency information in your headphones comparison?

Information on THD

The term THD (Total Harmonic Distortion) refers to the (unwanted) distortion that occurs when the signal is converted into sound in the headphones. In other words: How faithful is the end result of the signal that was sent to the headphones. The THD is another promotional ploy that manufacturers rarely mention these days.

Modern headphones have THD values, which makes it the ordinary people impossible to notice a difference between the two signals, for values of 0.1% are absolutely no longer a rarity. Nobody will even notice the difference of 0.3% and 0.1%, which is why many manufacturers no longer advertise this value at all: The difference in the decimal point is so small and negligible that it is simply no longer a sales argument.
We have therefore also deleted this value from our data sheet.

Our opinion on frequency information

Various manufacturers like to advertise with abnormally high frequency ranges 20 Hz – 100 kHz or High Resolution Audio, but this is primarily just a marketing ploy. No normal person perceives the spectrum beyond 20 kHz or below 20 Hz. In addition, the digital source must first be able to reproduce such a spectrum, so the benefit of high-resolution audio clearly depends on the quality of the medium. We therefore consider this value to be useless and do not include it in our headphone guide.

Impedance & SPL: Why the ohm value is the most important criterion for headphones

Impedance means nothing more than electrical resistance and is measured in ohms (Ω). In the context of headphones, the ohm value tells you how much juice you need to get your headphones at a decent volume. Basically, the higher the ohm value of the headphones, the more juice the headphones need.

Next, the value tells you how accurately and precisely can sound headphones, because the resistance is evidence of the electrical components used. If, for example, your smartphone, mainboard or MP3 player does not have enough power for the selected headphones, they will sound too quiet or you have a distorted sound.

A high resistance, which is specified in ohms, usually means an exact and sound reproduction of the medium, while headphones with a low ohm number can be prone to distortion. That is not to say that there are no headphones with excellent sound quality and low ohms, but there are significantly fewer bad-sounding headphones with high ohms than the other way around.

Nevertheless, you should take a look at the built-in motherboard before buying an Ohm-Monster to avoid disappointment. Gigabyte advertises, for example, that the high-quality amplifiers on their motherboards can handle 600 ohms, and each of the relevant sound cards still has significant reserves here.

So that you know from which ohm values ​​you need an amplifier, you can simply follow our mini-instructions here:

• 32 ohms and 99 dB / mW or more: You don’t need an amplifier: These headphones can easily be used with battery-operated mobile devices (smartphones, tablets) and your desktop PC.
• Can be used with a high-quality desktop computer, laptop, or portable smart device: 32-80 ohms and 96 dB / mW or more. In the case of end devices with inferior quality, it can be difficult to achieve comfortable listening levels with soft music.
• 32-80 ohms and less than 96 dB / mW: You should invest in a good headphone amplifier. A low level of efficiency and a low impedance means that headphones consume above-average power.
• 80-300 + ohms and less than 99dB / mW: You definitely need a headphone amplifier, otherwise nothing works here.

The sensitivity of your headphones (specified in our headphone comparison in SPL – Sound Pressure Level ) is less important than the impedance, but still worth a look. The higher the SPL value (or efficiency, sound pressure level, sensitivity or sound pressure), the louder the headphones can play per milliwatt. Usually the sensitivity is given in decibels (Db).

The lower the sound pressure level, i.e. the specified Db number, the more power the headphones need to play loudly. So orientation: A value of 86 dB is seen as relatively low, while 110 dB is more likely to be classified as high .

This is where the impedance comes into play again: If your motherboard has enough power for the impedance of your headphones, you don’t have to worry about the volume in the form of the SPL. Only those who like to listen with their ears to the speakers in the disco need an extra high level of sensitivity.

Unfortunately, there is no uniform standard for calculating and specifying sensitivity and every manufacturer measures it differently. Therefore, the SPL value is not a good reference point for assessing the quality of headphones.

What is the difference between sound isolation and active sound cancellation?

The aim of every headphone is to isolate you from your environment and to leave you alone with your desired sound. Now there is no measurable standard for isolation from the environment, after all, every head and ear is shaped differently, but at least every design can be roughly classified according to its isolation:

I n ear headphones completely close the ear canal and thus have the best isolation, but also well padded
Over-ear headphones block the sound from the outside very well because they completely enclose the ear.
Open Back: If you have open back headphones, of course, the isolation will suffer from the open design and the noises from the outside will reach your ears much more easily. On-ear headphones have the worst isolation, as they simply sit on the auricle and therefore cannot completely enclose or close the ear, but they also make orientation in traffic safer and easier for intended mobile use.

Passive noise canceling is nothing else than the described sound isolation and the word itself is just a marketing trick , which fortunately is becoming increasingly rare. The above-mentioned sound insulation is always done passively, i.e. through the insulation of the material used, while sound suppression takes place actively, through so-called noise canceling.

Are noise-canceling headphones worthwhile for gaming?

Noise-canceling headphones, on the other hand, have an active filter that suppresses ambient noise even further and thus ensures absolute silence in your ear. For this purpose, specially installed microphones in the headphones pick up the noises and the volume from outside and the sound transducer then generates an inverted counter-noise, which practically neutralizes the volume of the environment. The result is a significantly reduced volume from the outside that is priceless, especially in noisy surroundings.

However, this type of active noise reduction needs energy and i st while gambling at home hardly necessary here provides the passive damping by well-insulated headphones already more than enough rest. In addition, the fun costs a significant surcharge, especially if it is supposed to work properly and is a waste of money for gamers on the home PC.

What types of transducers are there in headphones?

There are various technical procedures for operating the headphones, and we want to explain some of them to you so that you can at least hear about them.

The driver / sound transducer sits on the left and right in your headphones and is responsible for converting the incoming electrical voltage into vibrations and thus into sound. Everyone has visually seen the circular panes before, but ideally the user should only be able to see the back with the open construction.

The size of the sound transducer or driver units is less relevant than the material used or the type of driver, so that “bigger” is hardly synonymous with “better” here. A larger transducer can simply develop more power, but this is by no means too beneficial for the sound like high-quality materials or sophisticated mechanics. A large-sized transducer conjures up a powerful bass to the ear, but often has problems with clean highs, as the membrane can deform too quickly. Exceptions confirm the rule here too.

Dynamic Drivers / Dynamic Sound Transducers. The most widespread and cheapest way to put the sound on your ear. A coil made of extremely thin wire is vibrated by a magnet. which in turn generates sound. A wide variety of materials can be used for the coil and the membrane and the results can be worlds apart, although the type of drive is selve. This method is also used by high-end headphones such as the Focal Utopia and is therefore not an exclusion criterion for outstanding sound despite the cheap and simple design

Planar Magnetic or also called Orthodynamics sound transducer: These models move the entire membrane of the headphones instead of just a small coil, which requires a stronger magnet, but also guarantees better sound. For a larger magnet, however, you also need more power and thus quickly your own amplifier for the headphones. Headphones with orthodynamic transducers usually cost a little more than the Dynamic Driver headphone designs, with the transition in quality and price between the models being fluid

Planar Magnetic or also called Orthodynamics sound transducer: These models move the entire membrane of the headphones instead of just a small coil, which requires a stronger magnet, but also guarantees better sound. For a larger magnet, however, you also need more power and thus quickly your own amplifier for the headphones. Headphones with orthodynamic transducers usually cost a little more than the Dynamic Driver headphone designs, with the transition in quality and price between the models being fluid

Balanced Armature Drivers. These transducers are mostly built into in-ear headphones and represent a special solution for the small dimensions in in-ear headphones. Instead of only having one transducer on each side, the in-ear headphones now usually have several transducers in a row to achieve a rich sound. Since in-ear headphones are not suitable for continuous gaming, there are no such transducer designs in our lists

Do I need an amplifier or DAC for my headphones?

As long as the headphones can be operated without an amplifier, the answer is first of all: No. Because then the internal combination of DAC and amplifier on your motherboard is sufficient, even if the quality can perhaps be increased.

In fact, every headphone benefits from being connected to a sound card or external DAC / amplifier, but you don’t necessarily have to invest in this extra edition, especially if you are “just” playing.

Most motherboards can easily handle headphones up to 250 ohms and manufacturers such as Gigabyte even advertise that they use amplifiers that can handle up to 600 ohms. In addition, the onboard solutions have improved significantly in recent years, especially in the higher price ranges, and are less and less inferior to sound cards.

Our thoughts on external amplifiers

If you are looking for an external amplifier for your headphones, you can first contact the manufacturer of the headphones and see whether they offer a suitable amplifier. Such models are mostly adapted to each other and play well together.

Otherwise, you should make sure that the amplifier or sound card has at least one eighth of the power of the ohm resistance of the headphones, all common sound cards that significantly enhance the sound of the games come into question here. As an example, you can take the Beyerdynamics Cutsom Studio, which comes with an impedance of a good 80 ohms. The amplifier or the sound card should therefore bring at least 10MW of power.

As the name suggests, a DAC (Digital to Analog Converter) converts a digital signal into an analog signal, which then has to be amplified by an amplifier so that it can be used for analog loudspeakers at all. Here, too, music lovers in particular benefit from such a technology, converting the digital signal from the PC into an analog one, then upgrading it via an external amplifier and then sending it to the headphones, is clear overkill and the internally installed DAC / amplifier combinations are on the motherboard or the sound card are more than sufficient.

The E5 from Creative, for example, is more of an external sound card than just a combined DAC / AMP, and the question arises: Why not use the internal version of the sound card right away?

source https://homearama.tv/best-open-back-headphones-for-gaming/